Raspberry Pi Pico + Arducam hm01b0 UVC Firmware
Go to file
zongor 2e93f6f181 Fix cmake files and readme 2023-09-16 01:30:23 -04:00
arducam Initial Commit 2023-02-04 10:58:14 -05:00
.gitignore Fix cmake files and readme 2023-09-16 01:30:23 -04:00
CMakeLists.txt Fix cmake files and readme 2023-09-16 01:30:23 -04:00
LICENSE Initial commit 2023-02-04 10:55:49 -05:00
README.md Fix cmake files and readme 2023-09-16 01:30:23 -04:00
image.pio Initial Commit 2023-02-04 10:58:14 -05:00
main.c optimize speed a bit 2023-04-13 19:08:22 -04:00
pipewire_reset.sh Initial Commit 2023-02-04 10:58:14 -05:00
tusb_config.h Initial Commit 2023-02-04 10:58:14 -05:00
usb_descriptors.c Initial Commit 2023-02-04 10:58:14 -05:00
usb_descriptors.h Initial Commit 2023-02-04 10:58:14 -05:00

README.md

Raspberry Pi Pico + Arducam hm01b0 UVC Firmware

A very simple firmware for the arducam hm01b0 & raspberry pi pico that uses usb uvc protocol.

It honestly barely works, but the tinyusb implementation of uvc is still a work in progress so theoretically this will get better as tinyusb's uvc develops.

One consistant way to get this to work is using OBS Studio's virtual camera, a lot of other webcam programs do not play nice with it.

Another issue is that beacuse the image exported is 150x150px, some Voip programs will not be able to detect your output so you will need to scale the output to at least 1024x1024px

This has only been tested on linux, although it should work anywhere that the tinyusb uvc library works.

Also, during testing I had this weird issue where pipewire would randomly eat up all of my ram, so I decided to keep the shell script in this repo for reference in case you run into the same issue.

building

mkdir build && cd build && cmake .. && make

The output file is called arducam_firmware_uvc.uf2